Aluminum Prefab Buildings & Preassembled Structures
Frame Structure: Prefabricated aluminum building shall be ____________( )
feet wide by __________( ) feet long with overall height of
86" (interior use), or 89" including exterior roof
(outside use), and shall be of aluminum construction with
structural members of extruded aluminum angles, channels and
tee sections, 6063-T6 alloy. Building to be manufactured using
corrosion-proof mechanical fasteners and/or all structural
components to be welded together at all intersections creating
a unitized framework.
Shelf: One 21" deep full width formica counter,
a minimum of 32" from finished floor in all buildings
not more than 6 feet in either direction.
Wall Panels: Panels shall be 3/4" thick, high
impact resistant, moisture and expansion resistant exterior
grade composite board, solid insulation core, fire rated Class
I. .025 GA. stucco embossed aluminum sheet permanently laminated
to one side with almond vinyl coating laminated to interior
side.
Doors: Sliding aluminum door suspended from ceiling
with top mounting hangers, heavy steel axles, all steel ball
bearings with 11/8" nylon tires - load per hanger is
100 pounds - two per door. Along with heavy duty aluminum
box track and either side or top mounted heavy duty brackets.
Doors are to be fully weatherstripped and complete with hardware
including locksets and handles. Cashier booth models to have
center opening sliding door with cashier windows (see options).
Bottom portion to be paneled with stucco embossed aluminum
up to a muntin bar at window sill level, top portion to be
3/16" clear tempered safety glass. Swing type door of
commercial heavy duty hollow metal 13/4" thick steel
type with vision panel. Key and knob commercial type lock,
heavy duty hydraulic closer and heavy duty continuous roton
hinge.
Windows:
Aluminum frame, sliding type windows of minimum 1/8"
clear tempered safety glass with positive locking devices.
Fixed windows of minimum 3/16" clear tempered safety
glass.
Ceiling: Interior ceiling to be 3/4" thick high
impact resistant insulating core board with white vinyl
sheet permanently laminated to both sides.
Floor Structures: Built up floor panel assembly shall
fit tight against wall panels and fastened to bottom structural
frame. Assembly to consist of 11/2" weather resistant
exterior grade plywood covered with 3003 aluminum treadplate,
(in building 4' or less in one dimension). Larger buildings
to have an additional 1/4" underlayment of plywood
covered with a commercial grade vinyl tile.
Electrical Service: Electrical service of 125 amp
main lug panel box with eight circuits, pre-wired in conduit,
two 115 VAC duplex outlets and a fluorescent light fixture,
surface mounted. All electric work to conform with the National
Electrical Code. No bulbs included with light fixtures.
Exterior Roof: Exterior waterproof 4" rimfit
roof to be deep, roll formed, flat white pre-finished aluminum
interlocked with extruded anodized aluminum fascia and gutter
trim. Larger overhang roofs are shipped knocked down in
roll formed interlocking panels for assembly and installation
on site by others.
